3D Concrete Printing Technology

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material Includes methods for developing Concrete Polymer Building Components for 3D Printing Provides methods for formulating geopolymers for 3D printing for construction applications

Produk Detail:

  • Author : Jay G. Sanjayan
  • Publisher : Butterworth-Heinemann
  • Pages : 448 pages
  • ISBN : 0128154829
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOK3D Concrete Printing Technology

3D Concrete Printing Technology

3D Concrete Printing Technology
  • Author : Jay G. Sanjayan,Ali Nazari,Behzad Nematollahi
  • Publisher : Butterworth-Heinemann
  • Release : 15 February 2019
GET THIS BOOK3D Concrete Printing Technology

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed

3D Concrete Printing Technology

3D Concrete Printing Technology
  • Author : Jay G. Sanjayan,Ali Nazari,Behzad Nematollahi
  • Publisher : Butterworth-Heinemann
  • Release : 15 February 2019
GET THIS BOOK3D Concrete Printing Technology

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed

3D Printing of Concrete

3D Printing of Concrete
  • Author : Arnaud Perrot
  • Publisher : John Wiley & Sons
  • Release : 30 April 2019
GET THIS BOOK3D Printing of Concrete

The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt

Second RILEM International Conference on Concrete and Digital Fabrication

Second RILEM International Conference on Concrete and Digital Fabrication
  • Author : Freek P. Bos,Sandra S. Lucas,Rob J.M. Wolfs,Theo A.M. Salet
  • Publisher : Springer Nature
  • Release : 08 July 2020
GET THIS BOOKSecond RILEM International Conference on Concrete and Digital Fabrication

This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior,

High Tech Concrete: Where Technology and Engineering Meet

High Tech Concrete: Where Technology and Engineering Meet
  • Author : D.A. Hordijk,M. Luković
  • Publisher : Springer
  • Release : 08 June 2017
GET THIS BOOKHigh Tech Concrete: Where Technology and Engineering Meet

This book contains the proceedings of the fib Symposium “High Tech Concrete: Where Technology and Engineering Meet”, that was held in Maastricht, The Netherlands, in June 2017. This annual symposium was organised by the Dutch Concrete Association and the Belgian Concrete Association. Topics addressed include: materials technology, modelling, testing and design, special loadings, safety, reliability and codes, existing concrete structures, durability and life time, sustainability, innovative building concepts, challenging projects and historic concrete, amongst others. The fib (International Federation for Structural

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
  • Author : Timothy Wangler,Robert J. Flatt
  • Publisher : Springer
  • Release : 29 August 2018
GET THIS BOOKFirst RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018

Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss

3D Printing of Reinforced Concrete Elements: Technology and Design Approach

3D Printing of Reinforced Concrete Elements: Technology and Design Approach
  • Author : Anonim
  • Publisher : Unknown Publisher
  • Release : 16 January 2021
GET THIS BOOK3D Printing of Reinforced Concrete Elements: Technology and Design Approach

Highlights: We present the fabrication of RC members based on concrete 3D printing technology. A straight 3.00 m long RC beam is manufactured and tested under 3-point bending. A second RC beam has been also 3D printed with variable cross section. The approach will facilitate the production of free-form structurally optimized RC structures. Abstract: This paper deals with a novel approach to the fabrication of reinforced concrete (RC) members based on Concrete 3D printing technology. The approach consists in the partition

Printing in Plastic

Printing in Plastic
  • Author : James Floyd Kelly,Patrick Hood-Daniel
  • Publisher : Apress
  • Release : 13 August 2011
GET THIS BOOKPrinting in Plastic

Printing in Plastic: Build Your Own 3D Printer is your gateway into the exciting world of personal fabrication. The “printer” that you'll build from this book is a personal fabricator capable of creating small parts and other objects from drops of molten plastic. Design a part using a modeling tool such as Google SketchUp. Then, watch while the fabricator head sweeps back and forth and upwards, depositing plastic in all the right places. You can build anything from a replacement

Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping

Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping
  • Author : Massimo Di Nicolantonio,Emilio Rossi,Thomas Alexander
  • Publisher : Springer
  • Release : 04 June 2019
GET THIS BOOKAdvances in Additive Manufacturing, Modeling Systems and 3D Prototyping

This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus

Self-Assembly Lab

Self-Assembly Lab
  • Author : Skylar Tibbits
  • Publisher : Taylor & Francis
  • Release : 10 November 2016
GET THIS BOOKSelf-Assembly Lab

What if structures could build themselves or adapt to fluctuating environments? Skylar Tibbits, Director of the Self-Assembly Lab in the Department of Architecture at MIT, Cambridge, MA, crosses the boundaries between architecture, biology, materials science and the arts, to envision a world where material components can self-assemble to provide adapting structures and optimized fabrication solutions. The book examines the three main ingredients for self-assembly, includes interviews with practitioners involved in the work and presents research projects related to these topics

International Congress on Polymers in Concrete (ICPIC 2018)

International Congress on Polymers in Concrete (ICPIC 2018)
  • Author : Mahmoud M. Reda Taha
  • Publisher : Springer
  • Release : 06 April 2018
GET THIS BOOKInternational Congress on Polymers in Concrete (ICPIC 2018)

This volume collects the proceedings from the International Congress of Polymers in Concrete 2018 (ICPIC), held under the theme “Polymers for Resilient and Sustainable Concrete Infrastructure.” ICPIC 2018 provides an opportunity for researchers and specialists working in the fields of polymers to exchange ideas and follow the latest progress in the use of polymers in concrete infrastructure. It also showcases the use of polymers and polymer concrete in sustainable and resilient development, and provides a platform for local and overseas suppliers, developers,

Computational Modelling of Concrete Structures

Computational Modelling of Concrete Structures
  • Author : Günther Meschke,Bernhard Pichler,Jan G. Rots
  • Publisher : CRC Press
  • Release : 31 January 2018
GET THIS BOOKComputational Modelling of Concrete Structures

The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. Computational Modelling of Concrete Structures reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. The

Printing Architecture

Printing Architecture
  • Author : Ronald Rael,Virginia San Fratello
  • Publisher : Chronicle Books
  • Release : 22 May 2018
GET THIS BOOKPrinting Architecture

Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition

International Congress on Polymers in Concrete (ICPIC 2018)

International Congress on Polymers in Concrete (ICPIC 2018)
  • Author : Mahmoud M. Reda Taha
  • Publisher : Springer
  • Release : 06 April 2018
GET THIS BOOKInternational Congress on Polymers in Concrete (ICPIC 2018)

This volume collects the proceedings from the International Congress of Polymers in Concrete 2018 (ICPIC), held under the theme “Polymers for Resilient and Sustainable Concrete Infrastructure.” ICPIC 2018 provides an opportunity for researchers and specialists working in the fields of polymers to exchange ideas and follow the latest progress in the use of polymers in concrete infrastructure. It also showcases the use of polymers and polymer concrete in sustainable and resilient development, and provides a platform for local and overseas suppliers, developers,

3D Printing Basics for Entertainment Design

3D Printing Basics for Entertainment Design
  • Author : Anne E. McMills
  • Publisher : Taylor & Francis
  • Release : 12 October 2017
GET THIS BOOK3D Printing Basics for Entertainment Design

Affordable 3D printers are rapidly becoming everyday additions to the desktops and worktables of entertainment design practitioners – whether working in theatre, theme parks, television and film, museum design, window displays, animatronics, or... you name it! We are beginning to ask important questions about these emerging practices: · How can we use 3D fabrication to make the design and production process more efficient? · How can it be used to create useful and creative items? · Can it save us from digging endlessly through