Additives for Polyolefins

This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. Structured to make it easy for the reader to find solutions for specific property requirements Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Produk Detail:

  • Author : Michael Tolinski
  • Publisher : William Andrew
  • Pages : 304 pages
  • ISBN : 9780815520528
  • Rating : 5/5 from 1 reviews
CLICK HERE TO GET THIS BOOKAdditives for Polyolefins

Additives for Polyolefins

Additives for Polyolefins
  • Author : Michael Tolinski
  • Publisher : William Andrew
  • Release : 22 September 2009
GET THIS BOOKAdditives for Polyolefins

This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for

Additives for Polyolefins

Additives for Polyolefins
  • Author : Michael Tolinski
  • Publisher : William Andrew
  • Release : 17 March 2015
GET THIS BOOKAdditives for Polyolefins

Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter

Handbook of Polyolefins

Handbook of Polyolefins
  • Author : Cornelia Vasile
  • Publisher : CRC Press
  • Release : 21 June 2000
GET THIS BOOKHandbook of Polyolefins

A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.

Plastics Additives

Plastics Additives
  • Author : G. Pritchard
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKPlastics Additives

Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily

Mould Sticking, Fouling and Cleaning

Mould Sticking, Fouling and Cleaning
  • Author : David Packham
  • Publisher : iSmithers Rapra Publishing
  • Release : 19 January 2021
GET THIS BOOKMould Sticking, Fouling and Cleaning

This review first discusses mould release and then addresses mould fouling. Significant material and process variables are considered first and then practical guidance on the selection of release agents and surface treatments are addressed. This is followed by advice on mould cleaning and the assessment of mould sticking and mould fouling. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Additives for Plastics

Additives for Plastics
  • Author : Jiri Stepek,Hubert Daoust
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKAdditives for Plastics

This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by

Stabilisers for Polyolefins

Stabilisers for Polyolefins
  • Author : C. Krohnke,F. Werner
  • Publisher : iSmithers Rapra Publishing
  • Release : 19 January 2021
GET THIS BOOKStabilisers for Polyolefins

This review describes the main types of stabilisers with the focus on those categories for polyolefins. It also elucidates some of the physical and chemical aspects of such products when incorporated into the polymer matrix, discussing stability during weathering, heat ageing and processing. The review is supported by several hundred relevant abstracts selected from the Polymer Library.

Recycling of Polymers

Recycling of Polymers
  • Author : Raju Francis
  • Publisher : John Wiley & Sons
  • Release : 19 December 2016
GET THIS BOOKRecycling of Polymers

This timely reference on the topic is the only book you need for a complete overview of recyclable polymers. Following an introduction to various polymer structures and their resulting properties, the main part of the book deals with different methods of recycling. It discusses in detail the recycling of such common polymers as polyethylene, polypropylene and PET, as well as rubbers, fibers, engineering polymers, polymer blends and composites. The whole is rounded off with a look at future technologies and

Additives for Plastics Handbook

Additives for Plastics Handbook
  • Author : J. Murphy
  • Publisher : Elsevier
  • Release : 22 November 2001
GET THIS BOOKAdditives for Plastics Handbook

Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides

NMR Spectra of Polymers and Polymer Additives

NMR Spectra of Polymers and Polymer Additives
  • Author : Anita J. Brandolini,Deborah D. Hills
  • Publisher : CRC Press
  • Release : 12 May 2000
GET THIS BOOKNMR Spectra of Polymers and Polymer Additives

"Compiles nearly 400 fully assigned NMR spectra of approximately 300 polymers and polymer additives, representing all major clases of materials: polyolefins, styrenics, acrylates, methacrylates, vinyl polymers, elastomers, polyethers, polyesters, polymides, silicones, cellulosics, polyurethanes, plasticizers, and antioxidants."

Fluoropolymer Additives

Fluoropolymer Additives
  • Author : Sina Ebnesajjad,Richard Morgan
  • Publisher : William Andrew
  • Release : 05 December 2011
GET THIS BOOKFluoropolymer Additives

In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide you with a step by step description of techniques to select and incorporate these additives in various products. Engineers and scientits involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. In recent

Polymer Additives

Polymer Additives
  • Author : Jiri E. Kresta
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKPolymer Additives

Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas

Adhesion and Bonding to Polyolefins

Adhesion and Bonding to Polyolefins
  • Author : D. M. Brewis,I. Mathieson
  • Publisher : iSmithers Rapra Publishing
  • Release : 01 January 2002
GET THIS BOOKAdhesion and Bonding to Polyolefins

Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Brydson's Plastics Materials

Brydson's Plastics Materials
  • Author : Marianne Gilbert
  • Publisher : William Andrew
  • Release : 27 September 2016
GET THIS BOOKBrydson's Plastics Materials

Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures

Polypropylene

Polypropylene
  • Author : J. Karger-Kocsis
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKPolypropylene

My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however,