Amine Unit Corrosion in Refineries

The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability

Produk Detail:

  • Author : J Harston
  • Publisher : Elsevier
  • Pages : 56 pages
  • ISBN : 184569323X
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKAmine Unit Corrosion in Refineries

Amine Unit Corrosion in Refineries

Amine Unit Corrosion in Refineries
  • Author : J Harston,F Ropital
  • Publisher : Elsevier
  • Release : 18 April 2007
GET THIS BOOKAmine Unit Corrosion in Refineries

The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA),

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry
  • Author : Alec Groysman
  • Publisher : Springer
  • Release : 24 October 2016
GET THIS BOOKCorrosion Problems and Solutions in Oil Refining and Petrochemical Industry

This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current

Corrosion Inhibitors in the Oil and Gas Industry

Corrosion Inhibitors in the Oil and Gas Industry
  • Author : Viswanathan S. Saji,Saviour A. Umoren
  • Publisher : John Wiley & Sons
  • Release : 10 February 2020
GET THIS BOOKCorrosion Inhibitors in the Oil and Gas Industry

Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in

Gas Purification

Gas Purification
  • Author : Arthur L Kohl,Richard Nielsen
  • Publisher : Elsevier
  • Release : 28 August 1997
GET THIS BOOKGas Purification

This massively updated and expanded fifth edition is the most complete, authoritative engineering treatment of the dehydration and gas purification processes used in industry today. Of great value to design and operations engineers, it gives practical process and equipment design descriptions, basic data, plant performance results, and other detailed information on gas purification processes and hardware. This latest edition incorporates all significant advances in the field since 1985. You will find major new chapters on the rapidly expanding technologies of nitrogen

Corrosion and degradatio...

Corrosion and degradatio...
  • Author : François Ropital,Trevor Jones
  • Publisher : Editions OPHRYS
  • Release : 16 April 2021
GET THIS BOOKCorrosion and degradatio...

The second section describes the various techniques used in the petroleum industry to protect metallic materials, to detect and to monitor corrosion, in a manner readily accessible to non-specialist readers. --

Corrosion in Amine Treating Units

Corrosion in Amine Treating Units
  • Author : Johan van Roij
  • Publisher : Woodhead Publishing
  • Release : 01 September 2021
GET THIS BOOKCorrosion in Amine Treating Units

Corrosion in Amine Treating Units, 2E is a valuable report that was written to help remedy the lack of information by summarising findings from data on corrosion rates of carbon steels in amine units. The new edition has been fully updated and has broadened its focus to include corrosion in not only refining operations, but also in oil and gas production. New sections have been added on inhibition, corrosion modelling, and metallic coatings. More detailed description of the degradation mechanisms

Corrosion and Scale Handbook

Corrosion and Scale Handbook
  • Author : J. R. Becker
  • Publisher : PennWell Books
  • Release : 16 April 1998
GET THIS BOOKCorrosion and Scale Handbook

Corrosion & Scale Handbook Corrosion and scale in crude oil systems are two of the most costly problems facing oil companies, which go to great expense to effectively control the problems. Corrodable surfaces are found throughout production, transport, and refining equipment. Therefore, the protection of this equipment is critical to the profitability and successful operation of these companies. While scale control ranks lower in importance, its presence is also costly in terms of equipment damage. This book provides understanding of these

Corrosion and Materials Selection

Corrosion and Materials Selection
  • Author : Alireza Bahadori
  • Publisher : John Wiley & Sons
  • Release : 24 June 2014
GET THIS BOOKCorrosion and Materials Selection

The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources

Stainless Steels for Design Engineers

Stainless Steels for Design Engineers
  • Author : Michael F. McGuire
  • Publisher : ASM International
  • Release : 16 April 2021
GET THIS BOOKStainless Steels for Design Engineers

The rate of growth of stainless steel has outpaced that of other metals and alloys, and by 2010 may surpass aluminum as the second most widely used metal after carbon steel. The 2007 world production of stainless steel was approximately 30,000,000 tons and has nearly doubled in the last ten years. This growth is occurring at the same time that the production of stainless steel continues to become more consolidated. One result of this is a more widespread need to understand stainless steel

Carbon Dioxide Chemistry, Capture and Oil Recovery

Carbon Dioxide Chemistry, Capture and Oil Recovery
  • Author : Iyad Karamé,Janah Shaya,Hassan Srour
  • Publisher : BoD – Books on Demand
  • Release : 16 August 2018
GET THIS BOOKCarbon Dioxide Chemistry, Capture and Oil Recovery

Fossil fuels still need to meet the growing demand of global economic development, yet they are often considered as one of the main sources of the CO2 release in the atmosphere. CO2, which is the primary greenhouse gas (GHG), is periodically exchanged among the land surface, ocean, and atmosphere where various creatures absorb and produce it daily. However, the balanced processes of producing and consuming the CO2 by nature are unfortunately faced by the anthropogenic release of CO2. Decreasing the

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry
  • Author : Alec Groysman
  • Publisher : Springer
  • Release : 24 October 2016
GET THIS BOOKCorrosion Problems and Solutions in Oil Refining and Petrochemical Industry

This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current