Near Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining

This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 μm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining.

Produk Detail:

  • Author : Kapil Gupta
  • Publisher : Springer
  • Pages : 135 pages
  • ISBN : 9811015635
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKNear Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining

Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining

Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining
  • Author : Kapil Gupta,Neelesh Kumar Jain
  • Publisher : Springer
  • Release : 18 August 2016
GET THIS BOOKNear-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining

This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the

Gears in Design, Production and Education

Gears in Design, Production and Education
  • Author : Natalya Barmina
  • Publisher : Springer Nature
  • Release : 16 May 2022
GET THIS BOOKGears in Design, Production and Education

This book is the fourth volume in the series devoted to gear engineering and computer-aided design, production, testing and education. It comprises fundamental and applied research contributions by scientists and gear experts from all the world and covers recent developments and historical achievements in various spheres of mechanical engineering related to different kinds of gears, transmissions, and drive systems. It gathers contributions describing the advanced approaches to research, design, testing and production of practically all common and new kinds of

Computer Aided Production Engineering

Computer Aided Production Engineering
  • Author : Hongzan Bin
  • Publisher : John Wiley & Sons
  • Release : 21 December 2001
GET THIS BOOKComputer Aided Production Engineering

Innovation in all aspects of mechanical engineering and management Computer Aided Production Engineering is a compilation of papers presented at the 17th International CAPE Conference in 2001. Featuring the work of leading innovators from academia and industry, this book explores the forefront of mechanical engineering technology and practices to provide insight for today and direction for tomorrow. Broad in scope yet rich in detail, these papers cover topics ranging from supply chain management, nontraditional processes, and quality control, to machining processes,

Cylindrical Gears

Cylindrical Gears
  • Author : Heinz Linke,Jörg Börner,Ralf Heß
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 05 September 2016
GET THIS BOOKCylindrical Gears

Unrivalled compendium on the development of gear units This book contains a complete presentation of all branches essential for the development of gear units, in particular that of cylindrical gears. The main subareas are geometry, load capacity, gear noise, design process, quality assurance, materials, heat treatment, and manufacturing. Further topics covered are material selection, strength values, the creation of drawings as well as practical design examples. The used technical terms and standards are based on the internationally valid and applied

The Theory Of Machines Through Solved Problems

The Theory Of Machines Through Solved Problems
  • Author : J. S. Rao
  • Publisher : New Age International
  • Release : 16 May 2022
GET THIS BOOKThe Theory Of Machines Through Solved Problems

The Theory Of Machines Or Mechanism And Machine Theory Is A Basic Subject Taught In Engineering Schools To Mechanical Engineering Students. This Subject Lays The Foundation On Which Mechanical Engineering Design And Practice Rests With. It Is Also A Subject Taught When The Students Have Just Entered Engineering Discipline And Are Yet To Formulate Basics Of Mechanical Engineering. This Subject Needs A Lost Of Practice In Solving Engineering Problems And There Is Currently No Good Book Explaining The Subject Through

Handbook of Practical Gear Design

Handbook of Practical Gear Design
  • Author : Stephen P. Radzevich,Darle W. Dudley
  • Publisher : CRC Press
  • Release : 21 October 1994
GET THIS BOOKHandbook of Practical Gear Design

For more than 30 years the book Practical Gear Design, later re-titled Handbook of Practical Gear Design, has been the leading engineering guide and reference on the subject. It is now available again in its most recent edition. The book is a detailed, practical guide and reference to gear technology. The design of all types of gears is covered, from those for small mechanisms to large industrial applications. The presentation is designed for easy reference for those involved in practical gear

Gears and Gear Drives

Gears and Gear Drives
  • Author : Damir T. Jelaska
  • Publisher : John Wiley & Sons
  • Release : 22 October 2012
GET THIS BOOKGears and Gear Drives

Understanding how gears are formed and how they interact or ‘mesh’ with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book. Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to

Classical and Modern Approaches in the Theory of Mechanisms

Classical and Modern Approaches in the Theory of Mechanisms
  • Author : Nicolae Pandrea,Dinel Popa,Nicolae-Doru Stanescu
  • Publisher : John Wiley & Sons
  • Release : 14 February 2017
GET THIS BOOKClassical and Modern Approaches in the Theory of Mechanisms

Classical and Modern Approaches in the Theory of Mechanisms is a study of mechanisms in the broadest sense, covering the theoretical background of mechanisms, their structures and components, the planar and spatial analysis of mechanisms, motion transmission, and technical approaches to kinematics, mechanical systems, and machine dynamics. In addition to classical approaches, the book presents two new methods: the analytic-assisted method using Turbo Pascal calculation programs, and the graphic-assisted method, outlining the steps required for the development of graphic constructions

Gears

Gears
  • Author : Vincenzo Vullo
  • Publisher : Springer Nature
  • Release : 21 February 2020
GET THIS BOOKGears

This book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among

Frontiers of Manufacturing Science and Measuring Technology

Frontiers of Manufacturing Science and Measuring Technology
  • Author : Ran Chen,Wen Li Yao
  • Publisher : Trans Tech Publications Ltd
  • Release : 12 May 2011
GET THIS BOOKFrontiers of Manufacturing Science and Measuring Technology

Volume is indexed by Thomson Reuters CPCI-S (WoS). This book brings together 288 peer-reviewed papers on Manufacturing Science and Measuring Technology in order to promote the development of those fields, to strengthen international academic cooperation and communications and to exchange research ideas. It provides readers with a broad overview of the latest advances in the field of manufacturing science and measurement technology.

Bevel Gear

Bevel Gear
  • Author : Jan Klingelnberg
  • Publisher : Springer
  • Release : 25 March 2016
GET THIS BOOKBevel Gear

This is the first book to offer a complete presentation of bevel gears. An expert team of authors highlights the areas of application for these machine elements and presents the geometrical features of bevel gears as well as the various gear cutting processes based on gear cutting theory. The aspect of three-dimensional gearing is assessed in detail in terms of flank design, load capacity and noise behavior. A representation of production processes with the required technologies provides a knowledge base

New Approaches to Gear Design and Production

New Approaches to Gear Design and Production
  • Author : Veniamin Goldfarb,Evgenii Trubachev,Natalya Barmina
  • Publisher : Springer Nature
  • Release : 25 January 2020
GET THIS BOOKNew Approaches to Gear Design and Production

This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new