Laser Sintering with Plastics

Laser Sintering (LS) with plastics is one of the most promising additive manufacturing technologies: it is currently regarded as the process most likely in the future to permanently cross the border between prototyping and the production of functional parts. This step is challenging because it means that the technology must meet certain requirements that are also valid for traditional and established production processes. Only by succeeding at this step can a wide industry acceptance of LS be expected in the future. In this context, this book covers all levels of the LS process chain, including: - Current state of the machine technology - Essential process steps, both before and during sintering - Specific demands of the materials, powder production methods, and evaluation of powder properties - Mechanical properties and density of the parts produced by LS Examples of LS-produced parts are given, including those with special design features, to illustrate the characteristics and also the limitations of the LS method. In particular, the distinct advantages of LS parts over parts produced with other plastics processing methods (e.g., injection molding) are discussed.

Produk Detail:

  • Author : Manfred Schmid
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Pages : 218 pages
  • ISBN : 1569906858
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKLaser Sintering with Plastics

Laser Sintering with Plastics

Laser Sintering with Plastics
  • Author : Manfred Schmid
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 07 May 2018
GET THIS BOOKLaser Sintering with Plastics

Laser Sintering (LS) with plastics is one of the most promising additive manufacturing technologies: it is currently regarded as the process most likely in the future to permanently cross the border between prototyping and the production of functional parts. This step is challenging because it means that the technology must meet certain requirements that are also valid for traditional and established production processes. Only by succeeding at this step can a wide industry acceptance of LS be expected in the

Advances in Polymer Processing 2020

Advances in Polymer Processing 2020
  • Author : Christian Hopmann,Rainer Dahlmann
  • Publisher : Springer Nature
  • Release : 10 March 2020
GET THIS BOOKAdvances in Polymer Processing 2020

This book gathers the proceedings of the International Symposium on Plastics Technology, which was held on March 10, 2020 in Aachen, Germany, and was organised by the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH Aachen University. Peer-reviewed by an international scientific committee, the conference proceedings comprise the papers presented by the international speakers. Topics covered include - circular economy- extrusion- lightweight technologies- simulation and digitisation - injection moulding- hybrid materials and additive manufacturing. In these fields, key themes

Handbook of Sustainable Polymers for Additive Manufacturing

Handbook of Sustainable Polymers for Additive Manufacturing
  • Author : Antonio Paesano
  • Publisher : CRC Press
  • Release : 12 May 2022
GET THIS BOOKHandbook of Sustainable Polymers for Additive Manufacturing

This book provides the latest technical information on sustainable materials that are feedstocks for additive manufacturing (AM). Topics covered include an up-to-date and extensive overview of raw materials, their chemistry, and functional properties of their commercial versions; a description of the relevant AM processes, products, applications, advantages, and limitations; prices and market data; and a forecast of sustainable materials used in AM, their properties, and applications in the near future. Data included are relative to current commercial products and are

Additive Manufacturing

Additive Manufacturing
  • Author : Juan Pou,Antonio Riveiro,Paulo Davim
  • Publisher : Elsevier
  • Release : 21 May 2021
GET THIS BOOKAdditive Manufacturing

Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics

3D Printing

3D Printing
  • Author : Andreas Gebhardt,Julia Kessler,Laura Thurn
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 10 December 2018
GET THIS BOOK3D Printing

This book is a clear and concise guide to Additive Manufacturing (AM), now a well-established valuable tool for making models and prototypes, and also a manufacturing method for molds and final parts finding applications in industries such as medicine, car manufacturing, and aerospace engineering. The book was designed as a supporting material for special courses on advanced manufacturing technology, and for supplementing the content of traditional manufacturing lessons. This second edition has been updated to account for the recent explosion

Concise Encyclopedia of Plastics

Concise Encyclopedia of Plastics
  • Author : Marlene G. Rosato,D.V. Rosato
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKConcise Encyclopedia of Plastics

After over a century of worldwide production of all kinds trol persons, cost estimators, buyers, vendors, consultants, of products, the plastics industry is now the fourth largest and others. industry in the United States. This brief, concise, and prac The bulk of the book is the alphabetical listing of en tical book is a cutting edge compendium of the plastics tries. Preceding those entries is A Plastics Overview: Fig industry's information and terminology-ranging from ures and Tables (which presents eight

Designing with Plastics

Designing with Plastics
  • Author : P. R. Lewis
  • Publisher : iSmithers Rapra Publishing
  • Release : 25 May 1993
GET THIS BOOKDesigning with Plastics

In this report Dr Lewis surveys the current state of the art in designing with plastics, in terms of materials properties and processing technologies. He also considers the legal implications of intellectual property and product liability, as well as ergonomic and aesthetic design, parts consolidation and recyclability. His review is supported throughout by references to key processes and applications, including many well known consumer products, and further information can be derived from the 435 abstracts of published papers which complete the

Additive Manufacturing

Additive Manufacturing
  • Author : Andreas Gebhardt,Jan-Steffen Hötter
  • Publisher : Hanser Gardner Publications
  • Release : 25 May 2022
GET THIS BOOKAdditive Manufacturing

The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction). Oriented towards the practitioner, in this book the basics of additive manufacturing are presented and the properties and special aspects of industrially available machines are discussed. From the generation of data to the forming method, the

Selective Laser Sintering Additive Manufacturing Technology

Selective Laser Sintering Additive Manufacturing Technology
  • Author : Chunze Yan,Yusheng Shi,Li Zhaoqing,Shifeng Wen,Qingsong Wei
  • Publisher : Academic Press
  • Release : 07 December 2020
GET THIS BOOKSelective Laser Sintering Additive Manufacturing Technology

Selective Laser Sintering Additive Manufacturing Technology is a unique and comprehensive guide to this emerging technology. It covers in detail the equipment, software algorithms and control systems, material preparations and process technology, precision control, simulation analysis, and provides examples of applications of selective laser sintering (SLS). SLS technology is one of the most promising advances in 3D printing due to the high complexity of parts it can form, short manufacturing cycle, low cost, and wide range of materials it is

Rapid Prototyping

Rapid Prototyping
  • Author : Chee Kai Chua,Kah Fai Leong,Chu Sing Lim
  • Publisher : World Scientific Publishing Company
  • Release : 14 January 2010
GET THIS BOOKRapid Prototyping

Latest Edition: 3D Printing and Additive Manufacturing: Principles and Applications. Fifth Edition of Rapid Prototyping. Rapid prototyping (RP) has revolutionized how prototypes are made and small batch manufacturing is carried out. With rapid prototyping, the strategies used to produce a part change a number of important considerations and limitations previously faced by tool designers and engineers. Now in its third edition, this textbook is still the definitive text on RP. It covers the key RP processes, the available models and

Automotive Plastics and Composites

Automotive Plastics and Composites
  • Author : Joseph P. Greene
  • Publisher : William Andrew
  • Release : 23 June 2021
GET THIS BOOKAutomotive Plastics and Composites

Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material,

Plastics Institute of America Plastics Engineering, Manufacturing & Data Handbook

Plastics Institute of America Plastics Engineering, Manufacturing & Data Handbook
  • Author : D.V. Rosato,Nick R. Schott,Marlene G. Rosato
  • Publisher : Springer Science & Business Media
  • Release : 30 November 2001
GET THIS BOOKPlastics Institute of America Plastics Engineering, Manufacturing & Data Handbook

This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements

Plastics Technology Handbook -

Plastics Technology Handbook -
  • Author : Don Rosato
  • Publisher : Momentum Press
  • Release : 13 October 2011
GET THIS BOOKPlastics Technology Handbook -

This comprehensive handbook provides a simplified, practical and innovative approach to understanding the design and manufacture of plastic products. It will expand the reader's understanding of plastics technology by defining and focusing on past, current, and future technical trends. The content is presented so that both technical and nontechnical readers can understand the interrelationships of materials to processes. Different plastic products are examined and their related critical factors are shown, from meeting performance requirements in different environments, to reducing costs

Reinforced Plastics Handbook

Reinforced Plastics Handbook
  • Author : Donald V Rosato,Dominick V Rosato,John Murphy
  • Publisher : Elsevier
  • Release : 25 May 2022
GET THIS BOOKReinforced Plastics Handbook

Introduction -- Reinforcements -- Plastics -- Compound constructions -- Fabricating processes -- Markets/Products -- Designs -- Engineering analysis -- Selecting plastic and process -- Summary -- Conversions.