Selecting Injection Molds

This book explains to the mold designer the importance of knowing the expected productivity of the mold and how this information affects the cost of the planned mold and the cost of the molded product. It suggests many approaches to reduce mold cost and also to improve productivity by often just simple design changes. Above all, it emphasizes again and again that the ultimate goal is not to procure the lowest cost but to produce the lowest cost product.

Produk Detail:

  • Author : Herbert Rees
  • Publisher : Hanser Gardner Publications
  • Pages : 250 pages
  • ISBN :
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKSelecting Injection Molds

Injection Molds for Beginners

Injection Molds for Beginners
  • Author : Rainer Dangel
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 06 April 2020
GET THIS BOOKInjection Molds for Beginners

This applications-oriented book describes the construction of an injection mould from the ground up. Included are explanations of the individual types of tools, components, and technical terms; design procedures; techniques, tips, and tricks in the construction of an injection mould; and pros and cons of various solutions. Based on a plastic part ("bowl with lid") specially developed for this book, easily understandable text and many illustrative pictures and drawings provide the necessary knowledge for practical implementation. Step by step, the

Injection Mold Design Handbook

Injection Mold Design Handbook
  • Author : Bruce Catoen,Herbert Rees
  • Publisher : Unknown Publisher
  • Release : 15 October 2021
GET THIS BOOKInjection Mold Design Handbook

An injection mold is the heart of any plastics molding workcell. Understanding the principles of an injection mold design and its importance is fundamental to the success of the product. This book takes the reader through the process of conceptualizing and designing an injection mold that will produce the desired plastic part.

Selecting Injection Molds

Selecting Injection Molds
  • Author : Herbert Rees,Bruce Catoen
  • Publisher : Hanser Gardner Publications
  • Release : 12 August 2022
GET THIS BOOKSelecting Injection Molds

This book explains to the mold designer the importance of knowing the expected productivity of the mold and how this information affects the cost of the planned mold and the cost of the molded product. It suggests many approaches to reduce mold cost and also to improve productivity by often just simple design changes. Above all, it emphasizes again and again that the ultimate goal is not to procure the lowest cost but to produce the lowest cost product.

Cost Analysis of Plastic Injection Molds

Cost Analysis of Plastic Injection Molds
  • Author : Carlos Sapene
  • Publisher : Lulu.com
  • Release : 01 January 2007
GET THIS BOOKCost Analysis of Plastic Injection Molds

The Cost Analysis of Plastic Injection Molds is a complete step-by-step guide of the different stages of the cost estimation process. In addition, this book highlights the applicable considerations needed during the selection of plastic injection molds. This book is recommended for those searching for a straightforward understanding of attaining the final cost of a plastic injection mold. Readers looking to learn and/or improve their understanding of the technical and financial considerations to assess a cost efficient selection of

Injection Mold Design Engineering

Injection Mold Design Engineering
  • Author : David O. Kazmer
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 06 June 2016
GET THIS BOOKInjection Mold Design Engineering

This book provides a structured methodology and scientific basis for engineering injection molds. The topics are presented in a top-down manner, beginning with introductory definitions and the big picture before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to real-world product design applications. It will help students and practitioners to understand the inner workings of injection molds and encourage them to think outside the box in

Plastic Injection Molding: Manufacturing Startup and Management

Plastic Injection Molding: Manufacturing Startup and Management
  • Author : Douglas M. Bryce
  • Publisher : Society of Manufacturing Engineers
  • Release : 12 August 1999
GET THIS BOOKPlastic Injection Molding: Manufacturing Startup and Management

This book in the Plastics Injection Molding series addresses the many facets of running a molding company including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a company operates in the red or is profitable. This book also includes a benchmarking feature that allows decision-makers to gauge their company's competitiveness in comparison to the

Cost Analysis of Plastic Injection Molds: A Step by Step Guide to Estimate the Final Cost of Plastic Injection Mold

Cost Analysis of Plastic Injection Molds: A Step by Step Guide to Estimate the Final Cost of Plastic Injection Mold
  • Author : Carlos Sapene
  • Publisher : Lulu Press, Inc
  • Release : 13 March 2013
GET THIS BOOKCost Analysis of Plastic Injection Molds: A Step by Step Guide to Estimate the Final Cost of Plastic Injection Mold

The Cost Analysis of Plastic Injection Molds is a complete step-by-step guide of the different stages of the cost estimation process. In addition, this book highlights the applicable considerations needed during the selection of plastic injection molds. -This book is recommended for those searching for a straightforward understanding of attaining the final cost of a plastic injection mold.-Readers looking to learn and/or improve their understanding of the technical and financial considerations to assess a cost efficient selection of

Injection Molding

Injection Molding
  • Author : Musa R. Kamal,Avram I. Isayev
  • Publisher : Carl Hanser Verlag GmbH Co KG
  • Release : 12 November 2012
GET THIS BOOKInjection Molding

This book attempts to survey the state of the science and technology of the injection molding process. It represents a comprehensive, balanced mix of practical and theoretical aspects for a wide range of injection molding applications. The authors of the 21 chapters are experts and leaders in their respective areas of specialization in the injection molding field. While it is not possible to cover all aspects of such a dynamic growing field, we hope that the reader will find sufficient information

Injection Molding Handbook

Injection Molding Handbook
  • Author : D.V. Rosato,Marlene G. Rosato
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKInjection Molding Handbook

This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more

Selecting Injection Molds

Selecting Injection Molds
  • Author : Herbert Rees
  • Publisher : Unknown Publisher
  • Release : 28 February 2006
GET THIS BOOKSelecting Injection Molds

The foremost intent of this book is to present various alternatives available to the mold designer or decision maker when planning a mold for a new product or planning to increase the productivity for a product for which a mold exists. Whether on the large mass market or the custom molder scale, the book goes through the critical issues to be considered before steel is cut.The reader will find answers to the most commonbut nonetheless difficultquestions they encounter in

Mold Engineering

Mold Engineering
  • Author : Herbert Rees
  • Publisher : Hanser Gardner Publications
  • Release : 12 August 2022
GET THIS BOOKMold Engineering

Stepped guidelines are supplied for the design of molds, from product drawing to complete mold assembly. Emphasis is given to the relationship between mold performance, productivity, and mold life.

Computer-Aided Injection Mold Design and Manufacture

Computer-Aided Injection Mold Design and Manufacture
  • Author : J.Y.H. Fuh,M. W. Fu,A.Y.C. Nee
  • Publisher : CRC Press
  • Release : 02 August 2004
GET THIS BOOKComputer-Aided Injection Mold Design and Manufacture

Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings

Total Quality Process Control for Injection Molding

Total Quality Process Control for Injection Molding
  • Author : M. Joseph Gordon, Jr.
  • Publisher : John Wiley & Sons
  • Release : 25 March 2010
GET THIS BOOKTotal Quality Process Control for Injection Molding

The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales