Standardisation of Thermal Cycling Exposure Testing

The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion. There has long been a need for an agreed code of practice with standardised methods and procedures to ensure both the comparability and reliability of the results obtained. Based on an EU project, ‘Cyclic oxidation testing – development of a code of practice for the characterisation of high temperature materials performance’ (COTEST), this volume provides the essential background to an appropriate code of practice. The first part of the book reviews the range of existing test procedures. Part two summarises research on the influence of various test parameters on thermal cycling oxidation behaviour, including both long dwell and short dwell thermal cycling oxidation. The third and final part of the book describes the resulting code of practice which is being considered by the ISO/TC 156 Working Group 13 responsible for an appropriate international standard. With its distinguished editor and team of contributors, this important book is a standard reference for all those conducting thermal cycling oxidation testing or assessing its implications in such sectors as the power industry. Provides the essential background for an appropriate code of practice Reviews the range of existing test procedures

Produk Detail:

  • Author : M Schütze
  • Publisher : Elsevier
  • Pages : 296 pages
  • ISBN : 1845693477
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKStandardisation of Thermal Cycling Exposure Testing

Standardisation of Thermal Cycling Exposure Testing

Standardisation of Thermal Cycling Exposure Testing
  • Author : M Schütze,M Malessa
  • Publisher : Elsevier
  • Release : 23 January 2014
GET THIS BOOKStandardisation of Thermal Cycling Exposure Testing

The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion. There has long been a need for an agreed code of practice with standardised methods and procedures to ensure both the comparability and reliability of the results obtained. Based on an EU project, ‘Cyclic oxidation testing – development of a code of practice for the characterisation of high temperature materials performance’ (COTEST), this volume provides the essential background to an appropriate code

Springer Handbook of Metrology and Testing

Springer Handbook of Metrology and Testing
  • Author : Horst Czichos,Tetsuya Saito,Leslie E. Smith
  • Publisher : Springer Science & Business Media
  • Release : 22 July 2011
GET THIS BOOKSpringer Handbook of Metrology and Testing

This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or

Corrosion of Metals and Alloys. Test Method for Thermal-Cycling Exposure Testing Under High-Temperature Corrosion Conditions for Metallic Materials

Corrosion of Metals and Alloys. Test Method for Thermal-Cycling Exposure Testing Under High-Temperature Corrosion Conditions for Metallic Materials
  • Author : British Standards Institute Staff
  • Publisher : Unknown Publisher
  • Release : 31 December 1912
GET THIS BOOKCorrosion of Metals and Alloys. Test Method for Thermal-Cycling Exposure Testing Under High-Temperature Corrosion Conditions for Metallic Materials

Metals, Alloys, Corrosion, Pitting corrosion, Corrosion tests, Defects, Identification methods, Visual inspection (testing), Inspection, Non-destructive testing, Radiographic testing, Replica techniques, Ultrasonic testing, Penetrant flaw detection, Microscopic analysis, Eddy-current tests, Metallography, Depth measurement, Dimensional measurement, Machining tolerances, Statistical methods of analysis, Reproducibility, Ratings, Mechanical properties of materials

Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation

Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation
  • Author : Jean-Pierre Celis
  • Publisher : Routledge
  • Release : 05 July 2017
GET THIS BOOKTesting Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation

This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers

Corrosion Monitoring in Nuclear Systems EFC 56

Corrosion Monitoring in Nuclear Systems EFC 56
  • Author : Stefan Ritter,Anders Molander
  • Publisher : Routledge
  • Release : 20 September 2017
GET THIS BOOKCorrosion Monitoring in Nuclear Systems EFC 56

Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research

Stress Corrosion Cracking of Nickel Based Alloys in Water-cooled Nuclear Reactors

Stress Corrosion Cracking of Nickel Based Alloys in Water-cooled Nuclear Reactors
  • Author : Damien Feron,Roger W Staehle
  • Publisher : Woodhead Publishing
  • Release : 30 January 2016
GET THIS BOOKStress Corrosion Cracking of Nickel Based Alloys in Water-cooled Nuclear Reactors

Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of

Corrosion Performance of Metals for the Marine Environment EFC 63

Corrosion Performance of Metals for the Marine Environment EFC 63
  • Author : Roger Francis
  • Publisher : CRC Press
  • Release : 14 May 2019
GET THIS BOOKCorrosion Performance of Metals for the Marine Environment EFC 63

Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.

Inter-Laboratory Study on Electrochemical Methods for the Characterization of Cocrmo Biomedical Alloys in Simulated Body Fluids

Inter-Laboratory Study on Electrochemical Methods for the Characterization of Cocrmo Biomedical Alloys in Simulated Body Fluids
  • Author : Igual A. Munoz,S. Mischler
  • Publisher : CRC Press
  • Release : 25 November 2020
GET THIS BOOKInter-Laboratory Study on Electrochemical Methods for the Characterization of Cocrmo Biomedical Alloys in Simulated Body Fluids

This special issue of Corrosion Engineering Science and Technology is dedicated to the study of corrosion of objects from historical sites. The issue contains contributions from the 2009 EUROCORR session on Corrosion of Archaeological and Heritage Artefacts organised by the European Federation of Corrosion's working party and commissioned articles on other key issues. The objective is to give the reader a broad understanding of corrosion of ancient materials, for the most part metal but also glass. Articles shed light on a

Corrosion Under Insulation (CUI) Guidelines

Corrosion Under Insulation (CUI) Guidelines
  • Author : Gino De Landtsheer
  • Publisher : Woodhead Publishing
  • Release : 22 August 2020
GET THIS BOOKCorrosion Under Insulation (CUI) Guidelines

Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for

Corrosion Under Insulation (CUI) Guidelines

Corrosion Under Insulation (CUI) Guidelines
  • Author : S Winnik
  • Publisher : Woodhead Publishing
  • Release : 26 November 2015
GET THIS BOOKCorrosion Under Insulation (CUI) Guidelines

Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13

Corrosion and Conservation of Cultural Heritage Metallic Artefacts

Corrosion and Conservation of Cultural Heritage Metallic Artefacts
  • Author : P Dillmann,D Watkinson,E Angelini,A Adriaens
  • Publisher : Elsevier
  • Release : 31 July 2013
GET THIS BOOKCorrosion and Conservation of Cultural Heritage Metallic Artefacts

The conservation of metallic archaeological and historic artefacts is a major challenge whether they are ancient bronzes or relics of our more recent industrial past. Based on the work of Working Party 21 Corrosion of Archaeological and Historical Artefacts within the European Federation of Corrosion (EFC), this important book summarises key recent research on analytical techniques, understanding corrosion processes and preventing the corrosion of cultural heritage metallic artefacts. After an introductory part on some of the key issues in this area,

Understanding Biocorrosion

Understanding Biocorrosion
  • Author : T Liengen,R Basseguy,Damien Feron,I Beech,V Birrien
  • Publisher : Elsevier
  • Release : 14 November 2014
GET THIS BOOKUnderstanding Biocorrosion

Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and

Engineering Tools for Corrosion

Engineering Tools for Corrosion
  • Author : Luciano Lazzari
  • Publisher : Woodhead Publishing
  • Release : 28 July 2017
GET THIS BOOKEngineering Tools for Corrosion

Engineering Tools for Corrosion: Design and Diagnosis proposes models and equations derived from theory. It includes discussions of the estimation of main corrosion parameters for corrosion rate, electrochemical constraints, thresholds limits and initiation time. The algorithms proposed are the conjugation of theory and engineering practice resulting from research and professional activities carried out by the author for almost four decades. Presents a rational approach to the corrosion prediction and evaluation dilemma Illustrates new models and algorithms for quantitative estimation of

High-temperature Solid Oxide Fuel Cells for the 21st Century

High-temperature Solid Oxide Fuel Cells for the 21st Century
  • Author : Kevin Kendall,Michaela Kendall
  • Publisher : Elsevier
  • Release : 21 November 2015
GET THIS BOOKHigh-temperature Solid Oxide Fuel Cells for the 21st Century

High-temperature Solid Oxide Fuel Cells, Second Edition, explores the growing interest in fuel cells as a sustainable source of energy. The text brings the topic of green energy front and center, illustrating the need for new books that provide comprehensive and practical information on specific types of fuel cells and their applications. This landmark volume on solid oxide fuel cells contains contributions from experts of international repute, and provides a single source of the latest knowledge on this topic. A