Stretch Blow Molding

Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau’s focus is on optimizing the production process, improving quality, and reducing cycle time. In this new edition, the author has thoroughly reviewed the content of the book, providing updates on new developments in stretch blow molding, including neck sizes, new equipment and processes, and the economics of the process. The book is a thoroughly practical handbook which provides engineers and managers with the toolkit to improve production and engineering aspects in their own businesses, allowing them to save money, increase output, and improve competitiveness by adopting new technologies. Provides knowledge and understanding of the latest technological and best practice developments in stretch blow molding Includes money saving, practical strategies to optimize the production process, improve quality, and reduce cycle times Provides a guide to the training of operators, as well as tactics on how to troubleshoot when products are faulty, productivity is low, or machinery is not operating as expected

Produk Detail:

  • Author : Ottmar Brandau
  • Publisher : William Andrew
  • Pages : 374 pages
  • ISBN : 0323462936
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKStretch Blow Molding

Stretch Blow Molding

Stretch Blow Molding
  • Author : Ottmar Brandau
  • Publisher : William Andrew
  • Release : 10 August 2016
GET THIS BOOKStretch Blow Molding

Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau’s focus is on optimizing the production process, improving quality, and reducing cycle time. In

Stretch Blow Molding

Stretch Blow Molding
  • Author : Ottmar Brandau
  • Publisher : William Andrew
  • Release : 22 November 2011
GET THIS BOOKStretch Blow Molding

1. Introduction; 2. Short history of Stretch Blow Moulding; 3. Material Basics; 4. Machine Descriptions; 5.Machine Details; 6. Blow Moulds; 7 Process Overview; 8 The Blowing Process; 9 Special applications; 10. Economics; 11. Trouble-Shooting Blowing Problems; 12 Auxiliaries Additions (will be merged with the earlier draft TOC above); PLA discussion; Different types of machines, pros/cons; Expand on factory setups with more detailed m/c; Expand on economics, resin pricing, buying practices, possible savings; Expand on machine descriptions both linear and rotary with more drawings/photos; Review shelf life extension options;

Handbook of Troubleshooting Plastics Processes

Handbook of Troubleshooting Plastics Processes
  • Author : John R. Wagner, Jr.
  • Publisher : John Wiley & Sons
  • Release : 19 September 2012
GET THIS BOOKHandbook of Troubleshooting Plastics Processes

This handbook provides a framework for understanding how tocharacterize plastic manufacturing processes for use introubleshooting problems. The 21 chapters are authored bywell-known and experienced engineers who have specialized knowledgeabout the processes covered in this practical guide. From the Preface: “In every chapter, the process is described and the mostcommon problems are discussed along with the root causes andpotential technical solutions. Numerous case studies are providedthat illustrate the troubleshooting process. Mark A. Spalding,The Dow Chemical Company

Practical Guide To Injection Blow Molding

Practical Guide To Injection Blow Molding
  • Author : Samuel L. Belcher
  • Publisher : CRC Press
  • Release : 05 March 2007
GET THIS BOOKPractical Guide To Injection Blow Molding

Injection blow molding is one of the main processes used in the blow molding industry. And although you may find information on this topic in general books on blow molding, the coverage is skimpy and lacking in details. None of them supply the sharply focused, essential information you will find in Samuel Belcher's Practical Guide to Injection B

Practical Guide to Blow Moulding

Practical Guide to Blow Moulding
  • Author : Norman C. Lee
  • Publisher : iSmithers Rapra Publishing
  • Release : 22 September 2021
GET THIS BOOKPractical Guide to Blow Moulding

Blow moulding is a manufacturing process used to form hollow plastic parts. It evolved from the ancient art of glass blowing and it is used to particular advantage with plastic materials. Celluloid was used first to blow mould baby rattles and novelties in the 1930s, linear low-density polyethylene was used in the 1940s for high production bottles and these days polyethylene terephthalate is used to make anything from soda bottles, to highly sophisticated multilayered containers and automotive fuel tanks in

Handbook on Pet Film and Sheets, Urethane Foams, Flexible Foams, Rigid Foams, Speciality Plastics, Stretch Blow Moulding, Injection Blow Moulding, Injection and Co-Injection Preform Technologies

Handbook on Pet Film and Sheets, Urethane Foams, Flexible Foams, Rigid Foams, Speciality Plastics, Stretch Blow Moulding, Injection Blow Moulding, Injection and Co-Injection Preform Technologies
  • Author : NIIR Board of Consultants & Engineers
  • Publisher : ASIA PACIFIC BUSINESS PRESS Inc.
  • Release : 09 January 2018
GET THIS BOOKHandbook on Pet Film and Sheets, Urethane Foams, Flexible Foams, Rigid Foams, Speciality Plastics, Stretch Blow Moulding, Injection Blow Moulding, Injection and Co-Injection Preform Technologies

Polyester or polyethylene terephthalate (PET) is an unreinforced, semi-crystalline thermo-plastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro-mechanical parts. PET is fully recyclable and can be easily reprocessed into many other products for many different applications. However, unlike paper and other cellulose products, PET does not readily decompose. However, biodegradable additives are available that enhance the biodegradation of

SPI Plastics Engineering Handbook of the Society of the Plastics Industry, Inc.

SPI Plastics Engineering Handbook of the Society of the Plastics Industry, Inc.
  • Author : Michael L. Berins
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKSPI Plastics Engineering Handbook of the Society of the Plastics Industry, Inc.

I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in

Advances in Blow Moulding Process Optimization

Advances in Blow Moulding Process Optimization
  • Author : Andres Garcia-Rejon
  • Publisher : iSmithers Rapra Publishing
  • Release : 22 September 1995
GET THIS BOOKAdvances in Blow Moulding Process Optimization

This report provides a review of the development and current understanding of blow moulding technology. The history and technology of blow moulding are reviewed and details are given on the research carried out in order to better understand the fundamental phenomena affecting the different stages of the process, and their interdependence in controlling final part characteristics. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.

Virtual and Rapid Manufacturing

Virtual and Rapid Manufacturing
  • Author : Ljubomir Tanchev
  • Publisher : CRC Press
  • Release : 17 September 2007
GET THIS BOOKVirtual and Rapid Manufacturing

Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key