Stainless Steel 2000

Austenitic stainless steels lend themselves to a wide range of applications. However, they normally stiffer from poor wear resistance and do not respond well to traditional surface treatments. This volume. the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. As well as the papers presented at the seminar, the book contains selection from related papers and a comprehensive bibliography of the literature on the subject from 1979 to 2000.

Produk Detail:

  • Author : Tom Bell
  • Publisher : CRC Press
  • Pages : 448 pages
  • ISBN : 100072493X
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKStainless Steel 2000

Stainless Steel 2000

Stainless Steel 2000
  • Author : Tom Bell,Katsuya Akamatsu
  • Publisher : CRC Press
  • Release : 31 January 2020
GET THIS BOOKStainless Steel 2000

Austenitic stainless steels lend themselves to a wide range of applications. However, they normally stiffer from poor wear resistance and do not respond well to traditional surface treatments. This volume. the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. As well as the papers presented at the seminar,

Thermochemical Surface Engineering of Steels

Thermochemical Surface Engineering of Steels
  • Author : Marcel A. J. Somers
  • Publisher : Woodhead Pub Limited
  • Release : 04 September 2014
GET THIS BOOKThermochemical Surface Engineering of Steels

Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world's leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing. There are also chapters on low temperature techniques as well as boriding, sheradizing, aluminizing, chromizing, thermo-reactive deposition and diffusion. Reviews the fundamentals of surface treatments and current performance of improved materials Covers nitriding, nitrocarburizing and carburizing of iron and iron carbon alloys Examines how different thermochemical

Thermochemical Surface Engineering of Steels

Thermochemical Surface Engineering of Steels
  • Author : Anonim
  • Publisher : Unknown Publisher
  • Release : 01 May 2018
GET THIS BOOKThermochemical Surface Engineering of Steels

Surface engineering is a multidisciplinary action intended to identify the properties of the surfaces of engineering mechanism in order to improve their function and serviceability. Corrosion, wear and fatigue are among the most important mechanisms that lead to materials degradation, which, eventually, leads to failure of components. Thus there is a great potential for saving resources, provided that the fundamentals of material behavior, and thus its performance including degradation, are understood, in order to define on that basis strategies to

B0752 Stainless Steel 2000

B0752 Stainless Steel 2000
  • Author : Anonim
  • Publisher : Unknown Publisher
  • Release : 14 May 2014
GET THIS BOOKB0752 Stainless Steel 2000

This volume, the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. The book also contains a selection from related papers and a comprehensive bibliography of the literature on the subject from 1979 to 2000.

Stainless Steel 2000

Stainless Steel 2000
  • Author : Tom Bell,Katsuya Akamatsu
  • Publisher : CRC Press
  • Release : 28 October 2021
GET THIS BOOKStainless Steel 2000

This volume, the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. The book also contains a selection from related papers and a comprehensive bibliography of the literature on the subject from 1979 to 2000.

Tribology and Surface Engineering

Tribology and Surface Engineering
  • Author : Aleksander Lisiecki
  • Publisher : MDPI
  • Release : 15 January 2020
GET THIS BOOKTribology and Surface Engineering

The book covers very important issues, not only scientific in nature but, ultimately, for industry and the economy. Wear and deterioration of surface properties during operation is a natural and unavoidable phenomenon. However, minimizing the degree of wear is of great importance for the entire economy, as illustrated by the example of the US economy, for which the loss of natural resources as a direct cause of friction and wear exceeds 6% of the Gross National Product. This book showcases the

Introduction to Surface Engineering

Introduction to Surface Engineering
  • Author : P. A. Dearnley
  • Publisher : Cambridge University Press
  • Release : 16 January 2017
GET THIS BOOKIntroduction to Surface Engineering

This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways -

Plasma Nitriding of Steels

Plasma Nitriding of Steels
  • Author : Hossein Aghajani,Sahand Behrangi
  • Publisher : Springer
  • Release : 24 September 2016
GET THIS BOOKPlasma Nitriding of Steels

This book focuses on the effect of plasma nitriding on the properties of steels. Parameters of different grades of steels are considered, such as structural and constructional steels, stainless steels and tools steels. The reader will find within the text an introduction to nitriding treatment, the basis of plasma and its roll in nitriding. The authors also address the advantages and disadvantages of plasma nitriding in comparison with other nitriding methods.

Current Trends in Boriding

Current Trends in Boriding
  • Author : Michal Kulka
  • Publisher : Springer
  • Release : 30 December 2018
GET THIS BOOKCurrent Trends in Boriding

This book presents the most important thermochemical and physical techniques of boriding. The formation and characterization of different boride layers or boride coatings are compared in this book. The author analyzes the technological aspects of boriding processes, presenting the advantages and disadvantages of each method. The effect of the boriding techniques on the microstructure of borided materials are also indicated. The mechanism of formation of active boron atoms or ions and the phenomena during re-melting of alloying material together with

Applied Nanoindentation in Advanced Materials

Applied Nanoindentation in Advanced Materials
  • Author : Atul Tiwari,Sridhar Natarajan
  • Publisher : John Wiley & Sons
  • Release : 30 August 2017
GET THIS BOOKApplied Nanoindentation in Advanced Materials

Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and

Heat Treating

Heat Treating
  • Author : ASM Heat Treating Society. Conference and Exposition
  • Publisher : ASM International
  • Release : 28 October 2021
GET THIS BOOKHeat Treating

provides the latest knowledge and information on scientific andvances, technology innovations, and commercial practice in heat treating. Features contributions from leading experts from around the world.

Advanced Techniques for Surface Engineering

Advanced Techniques for Surface Engineering
  • Author : W. Gissler,H.A. Jehn
  • Publisher : Springer Science & Business Media
  • Release : 17 April 2013
GET THIS BOOKAdvanced Techniques for Surface Engineering

Today's shortages of resources make the search for wear and corrosion resistant materials one of the most important tasks of the next century. Since the surface of a material is the location where any interaction occurs, it is that there the hardest requirements on the material are imposed: to be wear resistant for tools and bearings; to be corrosion resistant for turbine blades and tubes in the petrochemical industry; to be antireflecting for solar cells; to be decorative for architectural

Material Properties of Steel in Fire Conditions

Material Properties of Steel in Fire Conditions
  • Author : Weiyong Wang,Venkatesh Kodur
  • Publisher : Academic Press
  • Release : 10 November 2019
GET THIS BOOKMaterial Properties of Steel in Fire Conditions

Material Properties of Steel Fire Conditions is a major new contribution on how to understand the material properties of steel in fires. The application of new types of steel and development of sophisticated codes of practice has grown dramatically in recent years, making this a timely resource on the topic. Under fire conditions, knowing the material properties of steel is essential in the fire resistance design of steel structures, such as in Eurocode3. This book shows that the reduction factors

Rare Earth-Based Corrosion Inhibitors

Rare Earth-Based Corrosion Inhibitors
  • Author : Maria Forsyth,Bruce Hinton
  • Publisher : Elsevier
  • Release : 12 August 2014
GET THIS BOOKRare Earth-Based Corrosion Inhibitors

Corrosion inhibitors are an important method for minimizing corrosion; however traditional inhibitors such as chromates pose environmental problems. Rare earth metals provide an important, environmentally-friendly alternative. This book provides a comprehensive review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Chapter 1 begins by examining the important need to replace chromate, and then goes on to discuss the chemistry of the rare