Three Dimensional Microfabrication Using Two Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization (TPP) is the first comprehensive guide to TPP microfabrication—essential reading for researchers and engineers in areas where miniaturization of complex structures is key, such as in the optics, microelectronics, and medical device industries. TPP stands out among microfabrication techniques because of its versatility, low costs, and straightforward chemistry. TPP microfabrication attracts increasing attention among researchers and is increasingly employed in a range of industries where miniaturization of complex structures is crucial: metamaterials, plasmonics, tissue engineering, and microfluidics, for example. Despite its increasing importance and potential for many more applications, no single book to date is dedicated to the subject. This comprehensive guide, edited by Professor Baldacchini and written by internationally renowned experts, fills this gap and includes a unified description of TPP microfabrication across disciplines. The guide covers all aspects of TPP, including the pros and cons of TPP microfabrication compared to other techniques, as well as practical information on material selection, equipment, processes, and characterization. Current and future applications are covered and case studies provided as well as challenges for adoption of TPP microfabrication techniques in other areas are outlined. The freeform capability of TPP is illustrated with numerous scanning electron microscopy images. Comprehensive account of TPP microfabrication, including both photophysical and photochemical aspects of the fabrication process Comparison of TPP microfabrication with conventional and unconventional micromanufacturing techniques Covering applications of TPP microfabrication in industries such as microelectronics, optics and medical devices industries, and includes case studies and potential future directions Illustrates the freeform capability of TPP using numerous scanning electron microscopy images

Produk Detail:

  • Author : Tommaso Baldacchini
  • Publisher : William Andrew
  • Pages : 512 pages
  • ISBN : 032335405X
  • Rating : 4/5 from 21 reviews
CLICK HERE TO GET THIS BOOKThree Dimensional Microfabrication Using Two Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization
  • Author : Tommaso Baldacchini
  • Publisher : William Andrew
  • Release : 29 September 2015
GET THIS BOOKThree-Dimensional Microfabrication Using Two-Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization (TPP) is the first comprehensive guide to TPP microfabrication—essential reading for researchers and engineers in areas where miniaturization of complex structures is key, such as in the optics, microelectronics, and medical device industries. TPP stands out among microfabrication techniques because of its versatility, low costs, and straightforward chemistry. TPP microfabrication attracts increasing attention among researchers and is increasingly employed in a range of industries where miniaturization of complex structures is crucial: metamaterials, plasmonics, tissue

Three-Dimensional Microfabrication Using Two-Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization
  • Author : Tommaso Baldacchini
  • Publisher : William Andrew
  • Release : 31 October 2019
GET THIS BOOKThree-Dimensional Microfabrication Using Two-Photon Polymerization

Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used

Photoinitiators

Photoinitiators
  • Author : Jean-Pierre Fouassier,Jacques Lalevée
  • Publisher : John Wiley & Sons
  • Release : 05 April 2021
GET THIS BOOKPhotoinitiators

A comprehensive text that covers everything from the processes and mechanisms to the reactions and industrial applications of photoinitiators Photoinitiators offers a wide-ranging overview of existing photoinitiators and photoinitiating systems and their uses in ever-growing green technologies. The authors—noted experts on the topic—provide a concise review of the backgrounds in photopolymerization and photochemistry, explain the available structures, and examine excited state properties, involved mechanisms, and structure, reactivity, and efficiency relationships. The text also contains information on the latest

Additive Manufacturing, Second Edition

Additive Manufacturing, Second Edition
  • Author : Amit Bandyopadhyay,Susmita Bose
  • Publisher : CRC Press
  • Release : 16 October 2019
GET THIS BOOKAdditive Manufacturing, Second Edition

The field of additive manufacturing is growing dynamically as the interest is persisting from manufacturing sector, including other sectors as well. Conceptually, additive manufacturing is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Second edition of Additive Manufacturing highlights the latest advancements in the field, taking an application oriented approach. It includes new material on traditional polymer based rapid prototyping technologies, additive manufacturing of metals and alloys

Chromic Phenomena

Chromic Phenomena
  • Author : Peter Bamfield,Michael Hutchings
  • Publisher : Royal Society of Chemistry
  • Release : 22 August 2018
GET THIS BOOKChromic Phenomena

Chromic or colour related phenomena are produced in response to a chemical or physical stimulus. This new edition will update the information on all those areas where chemicals or materials interact with light to produce colour, a colour change, or luminescence especially in the imaging, analysis, lighting and display areas. The book has been restructured to show greater emphasis on applications where 'coloured' compounds are used to transfer energy or manipulate light in some way therefore reducing the details on

Optically Induced Nanostructures

Optically Induced Nanostructures
  • Author : Karsten König,Andreas Ostendorf
  • Publisher : Walter de Gruyter GmbH & Co KG
  • Release : 19 May 2015
GET THIS BOOKOptically Induced Nanostructures

Nanostructuring of materials is a task at the heart of many modern disciplines in mechanical engineering, as well as optics, electronics, and the life sciences. This book includes an introduction to the relevant nonlinear optical processes associated with very short laser pulses for the generation of structures far below the classical optical diffraction limit of about 200 nanometers as well as coverage of state-of-the-art technical and biomedical applications. These applications include silicon and glass wafer processing, production of nanowires, laser transfection

Essentials of 3D Biofabrication and Translation

Essentials of 3D Biofabrication and Translation
  • Author : Anthony Atala,James J Yoo
  • Publisher : Academic Press
  • Release : 17 July 2015
GET THIS BOOKEssentials of 3D Biofabrication and Translation

Essentials of 3D Biofabrication and Translation discusses the techniques that are making bioprinting a viable alternative in regenerative medicine. The book runs the gamut of topics related to the subject, including hydrogels and polymers, nanotechnology, toxicity testing, and drug screening platforms, also introducing current applications in the cardiac, skeletal, and nervous systems, and organ construction. Leaders in clinical medicine and translational science provide a global perspective of the transformative nature of this field, including the use of cells, biomaterials, and

Multiphoton Lithography

Multiphoton Lithography
  • Author : Jürgen Stampfl,Robert Liska,Aleksandr Ovsianikov
  • Publisher : John Wiley & Sons
  • Release : 12 September 2016
GET THIS BOOKMultiphoton Lithography

This first book on this fascinating, interdisciplinary topic meets the much-felt need for an up-to-date overview of the field. Written with both beginners and professionals in mind, this ready reference begins with an introductory section explaining the basics of the various multi-photon and photochemical processes together with a description of the equipment needed. A team of leading international experts provides the latest research results on such materials as new photoinitiators, hybrid photopolymers, and metallic carbon nanotube composites. They also cover

NMR · 3D Analysis · Photopolymerization

NMR · 3D Analysis · Photopolymerization
  • Author : Anonim
  • Publisher : Springer Science & Business Media
  • Release : 19 August 2004
GET THIS BOOKNMR · 3D Analysis · Photopolymerization

This series presents critical reviews of the present and future trends in polymer and biopolymer science including chemistry, physical chemistry, physics and materials science. It is addressed to all scientists at universities and in industry who wish to keep abreast of advances in the topics covered. Impact Factor Ranking: Always number one in Polymer Science. More information as well as the electronic version of the whole content available at: www.springerlink.com

Updates in Advanced Lithography

Updates in Advanced Lithography
  • Author : Sumio Hosaka
  • Publisher : BoD – Books on Demand
  • Release : 03 July 2013
GET THIS BOOKUpdates in Advanced Lithography

Advanced lithography grows up to several fields such as nano-lithography, micro electro-mechanical system (MEMS) and nano-phonics, etc. Nano-lithography reaches to 20 nm size in advanced electron device. Consequently, we have to study and develop true single nanometer size lithography. One of the solutions is to study a fusion of top down and bottom up technologies such as EB drawing and self-assembly with block copolymer. In MEMS and nano-photonics, 3 dimensional structures are needed to achieve some functions in the devices for the

3D Printing with Light

3D Printing with Light
  • Author : Pu Xiao,Jing Zhang
  • Publisher : Walter de Gruyter GmbH & Co KG
  • Release : 06 April 2021
GET THIS BOOK3D Printing with Light

The book introduces fundamentals of 3D printing with light, photoinitiating system for 3D printing as well as resins. Plenty of applications, trends and prospects are also discussed, which make the book an essential reference for both scientists and industrial engineers in the research fields of photochemistry, polymer chemistry, rapid prototyping and photopolymerization.

Nanomaterials for 2D and 3D Printing

Nanomaterials for 2D and 3D Printing
  • Author : Shlomo Magdassi,Alexander Kamyshny
  • Publisher : John Wiley & Sons
  • Release : 08 February 2017
GET THIS BOOKNanomaterials for 2D and 3D Printing

The first book to paint a complete picture of the challenges of processing functional nanomaterials for printed electronics devices, and additive manufacturing fabrication processes. Following an introduction to printed electronics, the book focuses on various functional nanomaterials available, including conducting, semi-conducting, dielectric, polymeric, ceramic and tailored nanomaterials. Subsequent sections cover the preparation and characterization of such materials along with their formulation and preparation as inkjet inks, as well as a selection of applications. These include printed interconnects, passive and active